EPOXY COATINGS
ECT-CF/FC – EPOXY CRACK FILLER/FAST CURE APPLICATIONS
ECT-CF FC is a fast cure, two component, sag resistant structural epoxy system designed to repair vertical or horizontal cracks. It has excellent adhesion to concrete, masonry, wood, metal and plastics. This system has been approved by the free spins casino no deposit uk (CFIA).
ECT-CR – CHEMICAL RESISTANT EPOXY COATING
ECT-CR is a 100% solid, two component epoxy coating. It provides a monochrome color with opaque and glossy finish, seamless, and a high covering power, ECT-CR provide excellent resistance to abrasion and is designed to protect substrates against chemical exposure. Seamless plinths are optional with ECTR COVE. This seamless coating from CTM Adhesives offers an unlimited choice of color, and a smooth or non-slip finish can be achieved using very fine to very aggressive aggregates. This system has been approved by the Canadian Food Inspection Agency (CFIA). It meets LEED standards.
ECT-CR EXTREME – EXTREME CHEMICAL RESISTANT/NOVOLAC EPOXY
ECTCR-EXTREME is a 100% solid, two component epoxy novolac coating. It provides a monochrome color with opaque and glossy finish, seamless, and a high covering power, ECTCR-EXTREME provide excellent resistance to abrasion and is designed to protect substrates against extreme chemical exposure. Seamless plinths are optional with ECTR COVE. This seamless coating from CTM Adhesives offers an unlimited choice of color, and a smooth or non-slip finish can be achieved using very fine to very aggressive aggregates. This system has been approved by the Canadian Food Inspection Agency (CFIA).
ECTR-1 – EPOXY URETHANE HYBRID FLEXIBLE MEMBRANE TOPCOAT
ECTR-1 is a solventless, two components, epoxy-polyurethane coating, that exhibits excellent appearance and physical properties. It was specifically designed to be used as a wear coat for the ECTM-FLEX membrane. This system has been approved by the Canadian Food Inspection Agency (CFIA). This product can be used to combination with silica sand for trowel application or it can be used as a finish coat. It meets LEED standards.
ECTM-FLEX – WATERPROOFING FLEXIBLE MEMBRANE/EPOXY URETHANE HYBRID
ECTM-FLEX is a solventless, 100% solid, two component, epoxy-polyurethane membrane. ECTM-FLEX is a seamless impermeable membrane coating, which was specifically designed to protect substrates against water infiltration. This membrane exhibits high elongation and a high resistance to tearing. This system has been approved by the Canadian Food Inspection Agency (CFIA). It meets LEED standards.
ECTR – STANDARD EPOXY COATING
ECTR is a 100% solid, two component epoxy coating. Monochrome color with opaque and glossy finish, seamless, and a high covering power, it can be used to restore deteriorated floors or protect new floors. ECTR provides excellent resistance to abrasion and chemical resistance. ECTR meets all kinds of requirements such as durability, performance as well as aesthetics. Seamless plinths are optional with ECTR COVE. This seamless coating from CTM Adhesives offers an unlimited choice of color, and a smooth or non-slip finish can be achieved using very fine to very aggressive aggregates. This system has been approved by the Canadian Food Inspection Agency (CFIA). It meets LEED standards.
ECTR-MET – STANDARD METALIC EPOXY COATING
ECTR METALIC is a 100% solid, two component epoxy coating. Monochrome color with opaque and glossy finish, seamless, and a high covering power, it can be used to restore deteriorated floors or protect new floors. ECTR METALIC provides excellent resistance to abrasion and chemical resistance. ECTR METALIC meets all kinds of requirements such as durability, performance as well as aesthetics. Seamless plinths are optional with ECTR COVE. This seamless coating from CTM Adhesives offers an unlimited choice of color, and a smooth or non-slip finish can be achieved using very fine to very aggressive aggregates. This system has been approved by the Canadian Food Inspection Agency (CFIA). It meets LEED standards.
ECTR-LV – EPOXY COATING/LOW VISCOSITY
ECTR-LV is a 100% solid, two component epoxy primer coating system. Its low viscosity and slow cure allows for superior penetration in concrete substrates. Specifically designed as a primer for all CTM Adhesives systems and as a binder for epoxy mortars. Clear or colored ECTR-LV can also be used as a finish coat under circumstances where a longer pot life is required. Seamless plinths are optional with ECTR COVE. This system has been approved by the Canadian Food Inspection Agency (CFIA). It meets LEED standards.
ECTR-FC – EPOXY COATING/FAST CURE APPLICATIONS
ECTR-FC is a 100% solid, two component epoxy coating, designed for fast cure applications. Monochrome color with opaque and glossy finish, seamless, and a high covering power, it can be used to restore deteriorated floors or protect new floors. ECTR-FC provides excellent resistance to abrasion and chemical resistance. ECTR-FC meets all kinds of requirements such as durability, performance as well as aesthetics. Seamless plinths are optional with ECTR COVE. This seamless coating from CTM Adhesives offers an unlimited choice of color, and a smooth or non-slip finish can be achieved using very fine to very aggressive aggregates. This system has been approved by the Canadian Food Inspection Agency (CFIA).
ECTR-LT – EPOXY COATING/LOW TEMPERATURE APPLICATIONS
ECTR-LT is a 100% solid, two component epoxy coating, designed for low temperature applications. Monochrome color with opaque and glossy finish, seamless, and a high covering power, it can be used to restore deteriorated floors or protect new floors. ECTR-LT provides excellent resistance to abrasion and chemical resistance. ECTR-LT meets all kinds of requirements such as durability, performance as well as aesthetics. Seamless plinths are optional with ECTR COVE. This seamless coating from CTM Adhesives offers an unlimited choice of color, and a smooth or non-slip finish can be achieved using very fine to very aggressive aggregates. This system has been approved by the Canadian Food Inspection Agency (CFIA).
ECT-VRM-2000 – VAPOR REDUCTION MEMBRANE
ECT-VRM-2000 is a 100% solid, two component epoxy coating, designed for controlling the moisture vapor emission rate on deteriorated or new floors. ECT-VRM-2000 meets ASTM F3010 product requirements for vapor permeance when applied at a thickness of 18 mils. The coating will control moisture vapor emission rates up to 25 lb. /24 hr. /1000 square feet. ECT-VRM-2000 provides excellent resistance to abrasion and chemical resistance. ECT-VRM-2000 meets all kinds of requirements such as durability, performance as well as aesthetics. This system has been approved by the Canadian Food Inspection Agency (CFIA). It meets LEED standards.